LED Tube Light 900mm

Input AC100-277V / AC220-240V
LED chip Epistar SMD2835
CRI 80
PF 0.95
Flicker No
THD <15
Waterproof IP40
Working temp. -40-50°C
Consult Now

Main specification

ProductLED tube light
InputAC200-240V/50-60Hz or AC100-277V /50-60Hz
Lumen efficency100lm/W, 130lm/W, 160lm/W
CRI80 (can offer CRI>90 if wanted)
DriverNon-isolated driver; Isolated driver (CE approved)
DimmableTriac,1-10V can choose
Working temp.-40°C - 50°C
IP gradeIP40

Energy efficency   class



3000K, 4000K,   5000K, 6000K   
(customized CCT available, precise to ±100K)
CertificatesCE, RoHS
Lifespan50000 hours
Warranty3 years, 5 years can choose

Item specification

Item NO.



LEDs qty90pcs90pcs112pcs
Ouput lumen1400lm1820lm2240lm

160lm/W IES luminous diagram (1500mm 24w for reference)

Operation Manual

Wiring With Magnetic Ballast&Starter

Ballast Compatibility:

Magnetic/inductive ballasts are compatible with LED Tubes, which are easy to replace.

Step 1. Turn off the power, and take out the old fluorescent tubes.

Step 2. Remove the old starter

Step 3. Install the LED Tube.

To save energy, we recommend you to remove the magnetic/inductive ballast (though compatible), and wire as below B1

Wiring with Electronic Ballast

Ballast Compatibility:

Electronic ballasts are not compatible with LED T8 tubes. Do NOT install the tube without removing/bypassing the electronic ballast as damage to the LED T8 tube may occur.

Step 1. Turn off the power, and take out the old fluorescent tubes.

Step 2. Remove/bypass the electronic ballast

Step 3. Wire as B1, and install the LED Tube directly.

If you do want to wire as follows, please advise us in advance we'll not shorten the end of the tube for   you.Otherwise, we'll   default to shorten the   end of   the   tube   and make   the   tube   with the above A1&B1 wiring

In the view of security, we recommend above B1 wiring method.


In order to working normally,Please confirm the using voltage is 85-265V;

1) Please follow correct installation way to install;

2) Please turn off the power supply when install or remove the tubes to avoid the electric shock;

3) Do not using in the place which is high humidity and full of dust in order to confirm the performance. (Bathroom,Bath house,polished workshop,etc);

4) Please install the lights to correct size of tube base;

5) Please confirm the problems causing below if it is not by wrong installation.


  • Why there are no lighting when connect the power supply.         

Switch off the power supply,and check where or not the electric circuit is powering up. And tube pins has connected well with Power supply sheet metal           

  • Why there are flicking when connect with the power supply

Please check whether or not the service voltage is lower nominal voltage;

If still can not solve it,please contact the qualified electronic technician or welcome to

contact us, thank you!

Packing info

Tube size900mm
Netweight(with Driver)0.2 KGS
Quantity/carton25 PCS
Carton Size(mm)950*220*220
Carton Weight12KG

Packing diagram


• Super bright Epistar SMD2835 LEDs source, isolated CE certificated driver;
• No flicker, high light efficiency , all choose A quality level electronic parts and component parts;
With good heat aluminum material, excellent thermal management and thermal performance;
• Constant current ,PF> 0.95, no flicker, no noise, input voltage AC90‐265V;
• Energy saving and low power consumption, saving up 40‐50% compared   to
Traditional fluorescent lamp and 80% to traditional incandescent lamp;
• Color temperature 2800‐6500K;
• CE,RoHS certificated, long lifespan over 50000 hours.


Widely used in Commercial purposes and Homeillumination, such as Conference&Meeting rooms,Residential, Buildings,Office,School,Library,Museum,Aisle,Shop window,Gambling house,Groggery,Department store,Booth...etc.